Skip to content

How to Care for Sansevieria Cleopatra (Dracaena)


Caring for Sansevieria Cleopatra is an easy and fun way to bring some greenery into your home. This relatively low-maintenance species of snake plant is a great choice for people who don’t have much experience with indoor plants or who simply want something that’s not too difficult to take care of.

In this article, I’ll be sharing my tips on how to keep your Sansevieria Cleopatra looking its best! From selecting the right potting soil to providing adequate sunlight, there are several key things you need to know when it comes to caring for your Sansevieria Cleopatra.

With just a few simple steps, you can ensure that your beautiful houseplant will stay healthy and thriving in any environment. So let’s get started!



I’m sure you’re excited to bring home a Sansevieria Cleopatra, and I don’t blame you! They are beautiful plants that are relatively easy to take care of.

When it comes to light requirements, they do best in bright but indirect sunlight. You should avoid placing them directly in full sun or dark shady spots as this could harm the plant’s health.

You’ll want to be careful not to let your Sansevieria Cleopatra get too much direct sunlight either; if it does, its leaves will start turning yellow.

If possible, try rotating the pot occasionally so all sides of the plant can receive some indirect light throughout the day.


So, now that we’ve discussed light requirements for Sansevieria Cleopatra, let’s talk about humidity. This plant needs to be in an environment with high levels of relative humidity. It should ideally be kept at 45-75%, but anywhere between 30 and 85% is acceptable.

Here are a few ways you can help maintain the proper level of humidity:

  • Use a humidifier or vaporizer
  • Cold mist vaporizers work well as they don’t need electricity
  • You can also use a wet pebble tray which works great because it adds moisture to the air without damaging your plants’ leaves
  • Grouping plants together will also help by increasing local humidity
  • Keep away from fans, heaters and AC units which all reduce humidity levels in the room

You might find that your Sansevieria Cleopatra gets droopy if there isn’t enough moisture in the air – this is usually how it responds when it’s too dry! So just make sure to keep an eye on its condition and provide extra humidity when needed.


Watering is the most important part of caring for your plant; too much or too little water will lead to problems. When it comes to watering, err on the side of caution – better to give your plant less than more!

Water your Sansevieria only when the soil in the pot has become completely dry. This should be about every two weeks in summer months, and every three to four weeks during wintertime. If you’re ever unsure whether or not you need to water, wait another week before doing so; sansevierias are tough plants that can survive periods without water if needed.

Overwatering can quickly cause root rot and other issues with this species, so make sure you don’t water too frequently.


Temperature requirements are one of the key components in keeping your plant healthy. A temperature range of 15-28°C (59-82°F) works best:

  • Cooler temperatures can cause slow growth or stunting
  • Warmer temperatures will encourage faster growth but should be avoided as they may also lead to root rot due to overwatering
  • Direct sunlight should be limited, especially during summer months when temperatures are highest. Too much direct sun can burn the leaves
  • Keep away from cold drafts and extreme heat sources like fireplaces and radiators.

If possible, keep an eye on the temperature so that your cleopatra stays healthy and happy!


Now that we’ve discussed temperature requirements for Sansevieria Cleopatra, let’s talk about soil requirements.

The ideal mix for this plant is one part regular potting soil and two parts coarse river sand or perlite.

You’ll want to make sure the soil drains well and doesn’t get waterlogged; you don’t want your Sansevieria sitting in soggy conditions!

To help keep it aerated, I recommend adding a few pieces of broken terra cotta pots on top of the soil.

This will also help to prevent root rot, which can be caused by overly saturated roots.

When watering your Sansevieria, try to stick with room-temperature water and use a spray bottle instead of pouring directly into the pot as too much water can lead to problems down the line.

Water when the top inch or so of soil has dried out, making sure not to over saturate it but at the same time being careful not to underwater either – just look for a nice balance between both!


Taking care of your Sansevieria Cleopatra is easy and rewarding! You should take the time to give it all the necessary attention, so that you can enjoy its beauty for years to come.

Here’s what you need to know about fertilizing:

  • Fertilize every 2 months in spring and summer with a liquid fertilizer diluted at half strength
  • Don’t fertilize during winter when plant growth is slow
  • Use a fertilizer suitable for succulents or cactus plants

If your Sansevieria Cleopatra looks like it needs more nutrients than regular watering can provide, then consider using an organic supplement such as fish emulsion.

Always keep an eye on how much fertilizer you are feeding your plant since too much could burn their roots and leaves. Remember less is better—just enough to help them grow without overfeeding!


Now that you know a thing or two about fertilizer requirements for your Sansevieria Cleopatra, let’s talk about potting and repotting. In the table below, I’ve outlined some of the key information to keep in mind when it comes to both these activities.

PottingChoose well-draining soil
Make sure there are adequate drainage holes
Use a container with enough room for growth
RepottingRepot every 2–3 years
Make sure not to damage roots during transfer
Prune the roots if necessary before transferring into new pot

It’s important to note that whenever you’re dealing with potting or repotting your plant, make sure you take care not to damage any of its sensitive root systems. If needed, prune them carefully prior to transfer into a new pot so as not to cause any unnecessary stress on the plant. Also remember to use containers with ample space and good drainage capabilities so your Sansevieria can thrive in its new home!


Caring for Sansevieria Cleopatra is fairly straightforward, but if you want to propagate your plant and grow more of them, it’s easier than you might think! Let me break down the process into three simple steps.

First up, get yourself some cuttings from a healthy adult Sansevieria Cleopatra. You’ll need at least two leaves per cutting – don’t worry about any yellowing or brown spots that may be on them as these are usually just signs of age. The cuttings should have an inch or so of stem attached to each leaf.

Then, fill a small pot with well-draining soil mix such as cactus and succulent mix. Make sure the soil has been mixed with sand or perlite to ensure good drainage and aeration. Place the cuttings in the pot and lightly press the soil around them until they’re secure. Water thoroughly and allow it to drain completely before moving onto the next step: propagating!

For this part, all you need to do is place plastic wrap over the top of your pot and use something like a chopstick or pencil to poke several holes in it (this will help air circulation). Then place your pot somewhere warm and bright but not direct sunlight so that your new plants can enjoy indirect light while they establish themselves. Keep an eye out for roots growing through the bottom of your pots which is a sign that everything is going great!


When it comes to toxicity, this plant is mildly toxic to pets and humans due to a natural insecticide called saponins. 

 Some people may experience skin irritation when coming into contact with this plant from the leaf sap. Also, keep any curious children or animals away so they don’t accidentally ingest any part of the plant.

Overall, with proper precautions taken and regular maintenance done on your Sansevieria Cleopatra, you can enjoy its beauty and grace in your home for many years to come!

Pests And Diseases

Moving on from the topic of Toxicity, let’s talk about pests and diseases!

Sansevierias are considered fairly resistant plants when it comes to pests and diseases but there are a few problems you should be aware of:

1. Spider mites may attack if the air is too dry.

2. Root rot can occur if the plant is overwatered in poorly draining soil.

3. Mealybugs may cause yellow spots on the leaves which indicate infestation.

4. Aphids occasionally appear near new growths so keep an eye out for them as well.

To prevent any of these issues, make sure that your Cleopatra has plenty of bright light, watered adequately (but never leave in standing water), move it away from drafts and hot areas, mist regularly with lukewarm water and clean off dust often with a damp cloth or sponge.

Doing all these will help your Sansevieria stay healthy!


Sansevieria Cleopatra Vs. Silver Blue

When it comes to houseplants, Sansevieria Cleopatra and Silver Blue are two of the most popular varieties of snake plants. Both offer a beautiful and unique look to any home or office space, but they have some differences that should be taken into consideration when selecting one for your own space.

Sansevieria Cleopatra is known for its upright sword-shaped leaves that can reach up to 10 inches in height. This variety requires minimal care; simply providing indirect sunlight and allowing the soil to dry out between waterings will do the trick.

On the other hand, Silver Blue has a more compact appearance with stiff blue-gray foliage. It also has low light and watering requirements. 

All in all, either variety would make an attractive addition to your home or office—it just depends on which style fits better with your décor and how much maintenance you’re willing to commit to them.


In conclusion, Sansevieria Cleopatra is an easy-care houseplant that requires minimal maintenance.

It thrives on bright, indirect light and should be watered only when the soil has dried out completely.

Humidity levels should remain low to moderate and temperatures should stay between 65-80 degrees F (18-27 C).

The soil should be well draining with a mix of potting soil, sand or perlite for optimal growth.

Propagation can also be done by division or leaf cuttings in water or soil.

Silver Blue may look similar but its leaves tend to curl under more than those of the Cleopatra variety.

With proper care, you’ll have your Sansevieria Cleopatra thriving in no time!

Where to Buy Sansevieria Cleopatra

If you are interested in owning your own Sansevieria Cleopatra or want to check the price, the Sansevieria Cleopatra is available for sale from different sellers on Etsy.

Click Here to Check Price on Etsy

If you are interested in other Sansevieria (Dracaena) plants, we also have articles on Sansevieria Zeylanica, Sansevieria Laurentii, Sansevieria Coppertone, Sansevieria Black Gold, and Sansevieria Fernwood.


Subscribe To Our Newsletter

Receive a 10% off coupon code to our store.

You have Successfully Subscribed!